Steel Basicline® Labrets : 1.2mm (16ga) x 11mm x 3mm Ball

Steel Basicline® Labrets : 1.2mm (16ga) x 11mm x 3mm Ball

LAB

LAB

Steel Basicline® Labret Stud

The Steel Basicline® Labret Stud with a strength of 1.2 mm is available in lengths of 5.0 - 12.0 mm (in steps of one). The compatible ball has a diameter of 3.0 mm.
In a strength of 1.6 mm the balls diameter is 4.0 mm for the lengths 5.0 - 10.0 mm. With 11.0. 12.0. 14.0. 16.0. and 20.0 mm length the balls diameter is 5.0 mm.
In a strength of 2.0 mm the labret is available in lengths of 5.0. 6.0. 8.0. 10.0. 11.0 and 12.0 mm. The compatible ball has a diameter of 5.0 mm.
The labrets with a strength of 2.4 mm are available with lengths of 6.0. 8.0. 9.0. 10.0. 11.0 and 12.0 mm. The compatible ball has a diameter of 5.0 mm.

The bottom part of the attire is flattened. the top part gets closed by a threaded ball (so a labret / stud consists of a stem with a small plate and a ball). The ball gets screwed onto the studs external thread. By the way. all threads in our jewellery collection are standardised. therefore you can combine the rings. balls. bars and attachments. Keep an eye on sizes and threads of your favoured balls and attachments!

The article can. like all basics. be sterilised in an autoclave and due to the skin friendliness of the material it is absolutely harmless to allergic persons.

Suitable for: Ear, Lip, Tragus


Applicable Terms and Conditions should be read before ordering. Please Note: All products are sold individually unless otherwise stated, please contact us if you have any further questions. All prices are in $AUD and are excluding GST.


Thickness
Length
Ball Size